24
RQT8851
Recording from a VCR, etc.
Connect cables while the power to both the unit and
the external device is off.
Front of the unit
Yellow White Red
You can get a
sharper, clearer
picture by
connecting with
an S Video
cable instead of
the yellow video
cable.
Audio/Video
cable
S Video cable
RAM
-R
-R DL
-RW(V)
+R
+R DL
+RW
Preparation:
Turn on the unit and connected equipment.
RAM
If the disc is protected, release protection
(➔ 44).
When recording multilingual broadcasts (➔ 11)
•
•
•
to select the DVD drive.
Insert a disc.
to select the recording
mode (➔ 12).
e, r to select the input where
your external device is connected,
then
Front panel inputs are IN2.–
1
ENTER
TV
2 IN1
3 IN2
4DV
Input Select
1
ENTER
TV
2 IN1
3 IN2
4DV
Input Select
Start play on the external device.
at the point you want to
start recording to the disc.
Tips
You can also connect to the IN1 on the rear.
If the audio output of the other equipment is monaural, connect to
L/MONO on the IN2 input terminals at the front.
•
•
Recording from an External Device
To Next Page
Loading...
Need help?
General
