45
Setting Menus
RQT8851
Deleting All Recordings
Important: Once deleted, contents cannot be
recovered.
RAM
Perform preparation steps 1−4 of “Accessing the
Management Menus” (➔ 44).
e, r select “Delete All
Recordings”, then
w to select “Yes”, then
w to select “Start”, then
A message appears when deleting is finished.–
8
to complete.
Notes
Deleting does not work if one or more recordings are protected.
Formatting Discs or Cards
Important: Once formatted, contents cannot be
recovered.
RAM
-RW(V)
+RW
-RW(VR)
SD
Perform preparation steps 1−4 of “Accessing the
Management Menus” (➔ 44).
e, r to select “Format Disc
(DVD)” or “Format memory card”,
then
w to select “Yes”, then
w to select “Start”, then
Formatting starts (
RAM
may take up to a
maximum of 70 minutes).
A message appears when formatting is
finished.
–
–
8
to complete.
•
Notes
Do not disconnect the AC power supply cord while formatting. This
can render the disc or the card unusable.
When a disc or card has been formatted using this unit, it may not
be possible to use it on any other equipment.
-R
-R DL
+R
+R DL
CD
Formatting cannot be performed.
-RW(V)
-RW(VR)
You can format only as DVD-Video format on this
unit.
RAM
Pressing [RETURN] during format will cancel the process.
The disc must be reformatted if you do this.
RAM
SD
The disc or card cannot be formatted if the write-protect
tab or switch (➔ 44) is switched to “PROTECT” or “LOCK”. Release
the protection to continue.
The message “Unable to format” appears when trying to format
discs the unit cannot use.
Selecting Whether to Show the Top Menu First
-R
-R DL
-RW(V)
+R
+R DL
+RW
Before finalizing a disc, select whether the top menu
shows after finalizing.
Perform preparation steps 1−4 of “Accessing the
Management Menus” (➔ 44).
e, r to select
“Playback will start
with:”, then
e, r to select desired item, then
DVD’s Top Menu:
The Top Menu appears first.
First Recording:
The disc content is played without displaying
the Top Menu.
•
•
•
•
•
•
•
•
•
To Next Page
Loading...
Need help?
General
