Panasonic DMR-ES30V

DVD
FUNCTIONS
Remote control
Tuning
Disc
Picture
Sound
Display
Connection
SETUP
Remote Control
Clock
Quick Start
Language
Shipping Condition
Default Settings
MODE 1
Others
Power Save
Automatisch
Aus
Deutsch
RETURN
MODE 1
MODE 2
MODE 3
Remote Control
RETURN
SELECT
ENTER
11
If you use another Panasonic unit at the same location, change the mode
of the remote control so that you can operate the units independently of each other.
!
Press FUNCTIONS in stop mode.
!
Use to select [To Others] and confirm with ENTER.
!
Use to select SETUP and confirm with ENTER.
!
Use to select [Others], to select [Remote Control] and confirm with ENTER.
!
Use to select the desired mode [MODE 1, 2 or 3] and confirm with ENTER.
Setting the remote control
Setting options
If you want to operate two units independently of each other with the same remote control,
then change the mode of the remote control.
Setting the remote control mode for unit
Accept the desired mode on the remote control.
!
Press and hold the ENTER button for approx. 2 seconds and, at the same time,
enter the number that corresponds to the displayed mode (1, 2 or 3).
MODE1: Select this setting for normal use.
If the mode of the remote control does not correspond with that of the unit,
[REMOTE MODE 1 / 2 / 3] will appear on the unit display.
!
Press and hold the
!
nu.
ENTER button for approx. 2 seconds and, at the same time,
enter the number that corresponds with the selected mode (1, 2 or 3).
Press RETURN to exit the me