Panasonic DMR-ES30V

Clock
OffAutomatic
0 00 00
1 1
2005
: : . .
Time Date
Tuning
Disc
Picture
Sound
Display
Connection
SETUP
Others
Remote Control
MODE 1
Clock
Power Save
Shipping Condition
Default Settings
Language
English
SELECT
RETURN
TAB
CHANGE
ENTER
RETURN
Off
Quick Start
On
Please set the clock.
ENTER: access RETURN: leave
SETUP
DVD
11
65
Remote Control
Clock
Power Save
Change the code of the remote control so that you can also use another
it at the same time.Panasonic DVD un
Manually setting the clock
!
Select Clock and confirm with ENTER.
!
Use to switch automatic mode to [Off]
and confirm with ENTER.
!
Use and to change Time and Date.
!
Confirm the change with ENTER.
Automatically setting the clock
!
Select Clock and confirm with ENTER.
!
Use to switch automatic mode to [On]
and confirm with ENTER.
The automatic setting of the clock begins.
If the date and time are not transmitted by the television station, they must be set manually.
[MODE 1] [MODE 2] [MODE 3]
Quick Start
Shipping Condition
Default Settings
All settings except for the security levels with associated password and the time settings
are reset to their factory settings.
All settings except for the programmed channels, time, country, language and disc-
language settings, the security levels including password and the remote-control code
are reset to the factory settings.
[ON] [Off]
On: Power save function in standby mode.
The brightness of the display field cannot be changed in power save mode. The quick
start setting is set to [Off].
If you want to use an external unit via Scart connector AV2, the DVD Recorder must
switched back out of standby mode.
Off: The brightness of the display field can be changed.
ENTER ENTER
Others Setting Option
Language
Select the desired language for the menus and the On-Screen Messages.
[ON] [Off]
On: The device is ready for use from standby mode after approx. 2 seconds.
Standby mode uses more power and Power Save is set to [Off].
FUNCTIONS
To Others
FUNCTIONS Selection Menu