Panasonic DMR-ES30V

VHS FUNCTIONS
Timer recording
QUICK ERASE
Tape length : AUTO
PB Colour system : AUTO
SQPB : AUTO
OSD : 4 : 3
( )
E - 240
: select : access
: return
ENTER
RETURN
VHS FUNCTIONS
Timer recording
QUICK ERASE
Tape length : AUTO
PB Colour system : AUTO
SQPB : AUTO
OSD : 4 : 3
( )
E - 240
: select : access
: return
ENTER
RETURN
: press for 5 seconds
: cancel
ENTER
STOP
VHS
69
Changing the Settings
!
Press FUNCTIONS in stop mode.
!
Use to select the desired entry.
!
Use to change the setting.
!
Press RETURN to exit the menu.
Settings in the VHS FUNCTIONS Menu
Erase all recordings on a played tape.
AUTO : Automatically detects PAL or MESECAM.
PAL : When the PAL system is used.
MESECAM : When the MESECAM system is used.
4:3 : Information appears on the edge of the screen
(in 16:9 format, the messages are not visible).
WIDE : Information appears on the edge of the screen
(in 4:3 format, the messages appear in the middle).
OFF : No information is displayed
AUTO : The unit automatically detects the recording type.
ON : Playback of an S-VHS cassette in Quasi-S-VHS format.
OFF : For playback of recordings in VHS format.
Setting the tape length of the used cassette.
( ),
AUTO E - 240 E - 195, E - 260, E - 300
VHS FUNCTIONS
QUICK ERASE
In order to be able to record on a used cassette tape without any quality problems, erase
the recordings on the cassette using the QUICK ERASE function.
!
Insert the cassette containing the content that you want to erase.
!
Press FUNCTIONS in stop mode.
!
Use to select QUICK ERASE and confirm with ENTER.
!
Press ENTER for 5 seconds to start the QUICK ERASE function.
The erase procedure takes about 30 minutes for an E-180 cassette. Once the end of the
cassette has been reached, the unit automatically rewinds the tape.
!
Press STOP to cancel the procedure.
Timer-controlled recording
Timer recording
QUICK ERASE
PB Colour system
OSD
SQPB
Tape length
FUNCTIONS
FUNCTIONS