DVD
43
ShowView is a trademark of Gemstar Development Corporation. The ShowView system is manufactured under
licence from Gemstar Development Corporation.
ShowView
RAM
-R
()
-RW V
+R
ShowView
Remain 1:58 SP
12:09:37 18.11. THU
ENTER
RETURN
Nr.
0 9
8
5 3
4 2
Enter ShowView Number by using 0-9 key.
TIMER
RECORDING
Remain 1:58 SP
12:09:37 18.11. THU
ENTER
RETURN
CANCEL
Date
Start Stop
Mode
VPS
PDC
SP ON
Name
Programme Name
No.
0 9
Press ENTER to store the programme.
VPS
PDC
Nr
Name
Datum
Mode
Stop
Start
TIMER
RECORDING
VPS
PDC
No.
Name
Date
Mode
Stop
Disc
space
Start
New Timer Programme
01 ZDF 18.11. THU 16:00 ON
15:00
SP
ENTER
RETURN
CANCEL
Remain 1:58 SP
12:09:37 18.11. THU
2 ZDF 18.11. THU 15:00 16:00
OK
33
TIMER-controlled recordings
You can programme up to 16 programmes per month in advance.
Insert a disc.
Programming recordings with ShowView
By entering a ShowView number, the TIMER-controlled recording is easy to set.
The appropriate codes can be found in newspapers and TV guides.
!
Press ShowView.
!
Enter the ShowView number using the number buttons.
Use to delete a number.
!
Confirm the ShowView number with ENTER.
In the TIMER RECORDING screen, check the start and end time and the
VPS/PDC signal.
If [ ] is displayed under Name, use to select the desired programme position.
!
Use , to select the recording mode. (XP, SP, LP, EP, FR)
If you selected VPS/PDC [ON], recording mode FR is not possible.
!
If you want to enter the programme name, use to select
[Programme Name] and confirm with ENTER.
!
Once you have performed all changes, save the programme with ENTER.
!
To continue programming, select [New Timer Programme].
!
Press TIMER to switch the unit to timer standby mode.
The symbol lights up in the unit display.
!
To cancel or pause the recording, press TIMER again.
VPS/PDC function
If the television station sends VPS/PDC signals, the beginning and end of a
recording are synchronised with the current air time. The programme start time
must be set correctly to the start time given in the magazine.
To Next Page
Loading...
