Before requesting service
STROM
DISPLAY
REMOTE CONTROL
PLAYBACK
11
10
10
60
60
10
72
63
65
76
No functions
The television cannot be operated.
î If the unit is in standby mode ( on the unit) end this with .
î A wrong remote control code was selected.
î Check the batteries. Point the remote control at sensor on the unit.
î The child lock feature has been activated.
TIMER
î A wrong remote control code was selected.
DVD-Video will not play.
A title or chapter is not played back after
being selected.
Alternative soundtracks and subtitles
cannot be selected.
No subtitles.
The perspective cannot be changed.
You forgot your classification password.
î The disc is dirty or badly scratched.
î You inserted a disc that is not suitable for playback.
î You inserted a blank disc.
î Some DVD-Videos cannot be played if the security level has been changed.
î Some titles and chapter of DVD-Video are not played back if the Ratings have
changed.
î The languages were not recorded on the disc.
î You may need to use the disc menu to select the languages.
î The language is not recorded on the disc.
î The subtitles are not recorded on the disc or are not switched on.
î The angle perspective can only be changed for scenes that were recorded in different
angles.
!
With the unit disc tray open, press and ho imultaneously for
at least 5 seconds.
ld REC and PLAY/ x1.3 s
Playback does not start.
No reaction when the button is pressed.
î appears on the screen. The procedure is stopped by the unit or the disc.
î The child lock feature has been activated.
The soundtrack/subtitle language does not
match the language selected in the S menu.ETUP
The display lighting
is weak.
" blinks on the unit display.0:00"
î Change the [FL Display] in the Display SETUP menu.
î No time. Set the time in the Others, [Clock] SETUP menu.