Panasonic DMR-HS2 - Connecting and Setting up (continued); Scart or S-Video Cable Connections; Scart Connection Steps; S-Video Connection Steps

16
Connecting and Setting up (continued)
Use a 21-pin Scart cable or Audio/Video cable (S-Video cable).
Follow these steps if you connect your unit to a television using a RF coaxial cable and a 21-pin Scart cable. (AV Connection)
A RF Coaxial cable must be connected to watch television even if a 21-pin Scart cable is also used to connect unit to the television.
ªConnect as following steps
1 RF Coaxial cable (supplied)
2 Fully-wired 21-pin Scart cable (not supplied)
3 Aerial lead (not supplied)
4 AC mains leads (supplied)
5 AC mains leads (not supplied)
Sockets
(1) AV1 21-pin Scart socket
(2) Aerial Input socket
(3) Aerial Output socket
(4) Aerial Input socket
(5) 21-pin Scart socket
Follow these steps if you connect your unit to a television using a S-Video cable. (S-Video Connection)
A RF Coaxial cable must be connected to watch television.
ªConnect as following steps
1 RF Coaxial cable (supplied)
2 Audio/Video cable (supplied)
3 S-Video cable (not supplied)
4 Aerial lead (not supplied)
5 AC mains leads (supplied)
6 AC mains leads (not supplied)
Sockets
(1) S-Video Output socket
(2) Audio/Video Output socket
(3) Aerial Input socket
(4) Aerial Output socket
(5) Aerial Input socket
(6) S-Video Input socket
(7) Audio/Video Input socket
(1)
(2)
(3)
(4)
(5)
1
2
3
4
5
(1)(2)
(3)
(4)
4
(5)
(6)
(7)
2
3
1
5
6
DVD(PAL).book16ページ２００３年５月１３日 火曜日 午後１２時３分