Panasonic DMR-HS2 - Changing the units settings (continued); Channel Settings Management; Manual Tuning Procedure; Tuning Box Screen Operations

79
Changing the unit’s settings (continued)
Channel Settings
Preparation
≥Switch [DVD, TV] (15) to “DVD”.
Selecting the manual tuning
1 While stopped
Press [FUNCTIONS] (11) to show the FUNCTIONS
window.
2 Use [3, 4, 2, 1] (10) to select “SETUP” and press
[ENTER]
(10).
≥The SETUP screen appears.
3 Use [3, 4] (10) to select the “Tuning” tab and
press [2] or [1]
(10).
4 Use [3, 4] (10) to select “Manual” and press
[ENTER]
(10).
5 Use [3, 4] (10) to select the TV station that you
want to tune and press [ENTER]
(10).
≥The TUNING BOX screen appears.
Handling the TUNING BOX screen
Use [3, 4, 2, 1]
(10) to select the desired field and
press [ENTER]
(10).
Pos:
To change the order in which the TV stations are assigned to the
programme positions.
Press the numeric buttons (4) to enter the number of the desired
programme position.
Name:
To enter or change the name of a TV station.
Use [3, 4, 2, 1] (10) to enter station name and press [ENTER]
(10).
≥If the station name needs a blank space, select the blank
between [Z] and [¢].
Channel:
To enter newly available TV stations or change the channel
number of an already tuned TV station.
Press the numeric buttons (4) to enter the channel number of the
desired TV station.
≥Wait a few moments until the desired TV station has been tuned.
Fine Tuning:
To obtain the best tuning condition.
Use [3, 4] (10) to obtain the best tuning condition.
≥If you do not want to change the tuning condition, Use [1] (10)
to return to the original condition [Auto].
Decoder:
To preset pay TV stations.
Use [3, 4] (10) to select “On“.
≥If “Decoder” is set to “Off”, normal TV stations are preset.
Mono:
To select the type of sound to be recorded.
Use [3, 4] (10) to select “Off“.
≥Select “On” if the stereo sound is distorted due to inferior
reception conditions, or if you want to record the normal (mono)
sound during a stereo, bilingual or NICAM broadcast.
Title Page: (For Continental Europe)
To select the title extraction from TV guide of broadcaster.
Use [3, 4] (10) to select the number between 100 and 899.
6 Press [RETURN] (23).
Adding, deleting, and moving channels
Use this function if:
≥Channels were not set correctly using automatic tuning.
≥A channel that should have been set wasn’t.
≥A channel’s reception is poor and you want to delete it.
Preparation
≥Switch [DVD, TV] (15) to “DVD”.
1 While stopped
Press [FUNCTIONS] (11) to show the FUNCTIONS
window.
2 Use [3, 4, 2, 1] (10) to select “SETUP” and press
[ENTER]
(10).
≥The SETUP screen appears.
3 Use [3, 4] (10) to select the “Tuning” tab and
press [2] or [1]
(10).
4 Use [3, 4] (10) to select “Manual” and press
[ENTER]
(10).
5 Use [3, 4, 2, 1] (10) to select the desired TV
station and use the [A], [B], [C] buttons ((29), (28),
(33)) to select “Delete“, “Add“, “Move“.
Follow the operations below.
To delete a programme position “Delete”:
Press [A] (29).
To insert a blank programme position “Add”:
Press [B] (28).
To move a TV station to another programme position “Move”:
Press [C] (33), and then use [3, 4] (10) to select the new
programme position to which you want to assign the TV station.
6 Press [RETURN] (23).
Note:
≥Setting can take up to 3 minutes approximately.
≥If downloading of the setup data has been performed, only the
instruction indication “Delete” appears.
Hint:
≥If you have performed Manual Tuning to enter TV stations, the
[jj] indication may appear under [Pos/Name] on the display
when programming a S
HOWVIEW (G-CODE) timer recording.
Manual
Tuning
SETUP
RETURN
Settings
Disc
Picture
Sound
Display
Connection
Auto-Setup Restart
Download
SELECT
ENTER
Manual Tuning
Pos Name Ch
ENTER
RETURN
SELECT
Pos Name Ch
B C D
A
Delete
Add
Move
1 ARD 4
2 ZDF
2
3 N3
5
4 HR3
8
5 BR3 10
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
Pos
Name
Channel
Fine Tuning
Decoder
Mono
1
Off
4
Auto
RETURN : leave
ENTER : store
Manual
Tuning
ARD
Off
Title Page
301
ENTER
RETURN
CHANGE
0 9
Manual
Tuning
SETUP
RETURN
Settings
Disc
Picture
Sound
Display
Connection
Auto-Setup Restart
Download
SELECT
ENTER
Manual Tuning
Pos Name Ch
ENTER
RETURN
SELECT
Pos Name Ch
B C D
A
Delete
Add
Move
1 ARD 4
2 ZDF
2
3 N3
5
4 HR3
8
5 BR3 10
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
DVD(PAL).book79ページ２００３年５月１３日 火曜日 午後１２時３分