Panasonic DMR-HS2 - Changing the units settings (continued); Power Save Setting Configuration; Country Settings Selection; Language Settings Selection

81
Changing the unit’s settings (continued)
Power Save Setting
Preparation
≥Switch [DVD, TV] (15) to “DVD”.
1 While stopped
Press [FUNCTIONS] (11) to show the FUNCTIONS
window.
2 Use [3, 4, 2, 1] (10) to select “SETUP” and press
[ENTER]
(10).
≥The SETUP screen appears.
3 Use [3, 4] (10) to select the “Settings” tab and
press [2] or [1]
(10).
4 Use [3, 4] (10) to select “Power Save” and press
[ENTER]
(10).
5 Use [3, 4] (10) to select “On” or “Off” and press
[ENTER]
(10).
≥On:
The power consumption is
greatly reduced when the
unit is turned off.
≥Off:
The power consumption is
not reduced when the unit is
turned off.
Refer to the followings when “Power Save” is set to “On”.
≥“FL Display” is automatically set to “Automatic”.
≥To turn the unit on, keep [Í/I] pressed on the main unit. It is
not possible to turn it on with the remote control.
≥The Power Save function does not work in the timer
recording standby mode. After all programmed timer
recordings have been made, and after all programmed data
have been erased, the unit switches over to the Power Save
mode.
≥When the unit is off, Pay TV programmes cannot be watched
on the TV because the signal from the connected decoder is
not looped through. To watch them, turn on the unit.
6 Press [RETURN] (23).
Language Settings
Preparation
≥Switch [DVD, TV] (15) to “DVD”.
1 While stopped
Press [FUNCTIONS] (11) to show the FUNCTIONS
window.
2 Use [3, 4, 2, 1] (10) to select “SETUP” and press
[ENTER]
(10).
≥The SETUP screen appears.
3 Use [3, 4] (10) to select the “Settings” tab and
press [2] or [1]
(10).
4 Use [3, 4] (10) to select “Language” and press
[ENTER]
(10).
5 Use [3, 4] (10) to select the desired language and
press [ENTER]
(10).
6 Press [RETURN] (23).
Country Settings
Preparation
≥Switch [DVD, TV] (15) to “DVD”.
1 While stopped
Press [FUNCTIONS] (11) to show the FUNCTIONS
window.
2 Use [3, 4, 2, 1] (10) to select “SETUP” and press
[ENTER]
(10).
≥The SETUP screen appears.
3 Use [3, 4] (10) to select the “Settings” tab and
press [2] or [1]
(10).
4 Use [3, 4] (10) to select “Country” and press
[ENTER]
(10).
5 Use [3, 4] (10) to select the desired country and
press [ENTER]
(10).
6 Press [RETURN] (23).
Shipping Condition
The all settings in the SETUP screen return to the factory settings.
(except for the ratings level and the password)
Preparation
≥Switch [DVD, TV] (15) to “DVD”.
1 While stopped
Press [FUNCTIONS] (11) to show the FUNCTIONS
window.
2 Use [3, 4, 2, 1] (10) to select “SETUP” and press
[ENTER]
(10).
≥The SETUP screen appears.
3 Use [3, 4] (10) to select the “Settings” tab and
press [2] or [1]
(10).
4 Use [3, 4] (10) to select “Shipping Condition” and
press [ENTER]
(10).
5 Use [2, 1] (10) to select “Yes” and press [ENTER]
(10).
6 Use [2, 1] (10) to select “Yes” and press [ENTER]
(10).
Tab
SELECT
Remote
Tuning
SETUP
RETURN
Settings
Disc
Picture
Sound
Display
Connection
Clock
Power Save
Language
Country
Shipping Condition
DVD 1
Others
Off
English
On
Off
ENTER
RETURN
SELECT
Tuning
SETUP
Settings
Disc
Picture
Sound
Display
Connection
Power Save
English
Deutsch
ENTER
RETURN
SELECT
Tuning
SETUP
Settings
Disc
Picture
Sound
Display
Connection
Language
Français
Italiano
Español
ENTER
RETURN
SELECT
Country
RETURN : leave ENTER : access
Others
Deutschland
Österreich
Portugal
Suomi
Sverige
Schweiz
Suisse
Svizzera
België
Belgique
Belgien
Danmark
España
Italia
Nederland
Norge
Yes
No
ENTER
RETURN
Tuning
SETUP
Settings
Disc
Picture
Sound
Display
Connection
Shipping Condition
Warning—all stored
tuning data will be lost !
Do you want to proceed ?
DVD(PAL).book81ページ２００３年５月１３日 火曜日 午後１２時３分