Panasonic DMR-HS2 - Playing discs;programmes recorded on HDD (continued); Marking Playback Points (MARKER); Marking Positions via Display Menus

24
Playing discs/programmes recorded on HDD (continued)
Marking places to play again—MARKER
[HDD] [RAM] [DVD-R]
You can mark up to 999 points on a disc to return to later. These
marks are recorded directly onto HDD/DVD-RAM, but are cleared
when you removed or finalized DVD-R.
[DVD-V] [CD] [VCD]
You can mark up to 5 points on a disc to return to later. All the
markers are cleared when the disc tray is opened.
Preparation
Switch [DVD, TV] (15) to “DVD”.
ªMarking positions directly
During play
Press [MARKER] (35).
≥One marker is added.
ªUsing DISPLAY menus to mark positions
Displaying the marker icon
1 During play
Press [DISPLAY] (24).
e.g.: When DVD-RAM is used
2 Use [3, 4] (10) to select the Play tab and press [1]
(10).
3 Use [3, 4] (10) to select “Marker” and press [1]
(10) to highlight the first asterisk (¢).
[HDD] [RAM] [DVD-R] [DVD-V] [CD] [VCD]
Marking positions
1 Use [2, 1] (10) to select an asterisk (¢).
2 Press [ENTER] (10).
≥One marker is added.
When marking positions 11 and above
[HDD] [RAM] [DVD-R]
1 Use [2, 1] (10) to highlight “1–10”.
2 Use [3, 4] (10) to select “11–20”.
≥You can select the next group of 10 when the current group
is full.
3 Use [1] (10).
≥The first asterisk is highlighted.
4 Press [ENTER] (10) to mark a position.
To play from a marked position
1 Use [2, 1] (10) to select a marker number.
2 Press [ENTER] (10).
≥Play starts from the marked position.
ªTo clear a marker
Use [2, 1] (10) to select a marker number and press [CANCEL]
(5).
≥An asterisk replaces the number and the position is cleared.
ªTo clear the DISPLAY menus
Press [DISPLAY] (24).
Note
[HDD] [RAM]
≥This feature doesn’t work while using a play list.
≥Markers cannot be added to or removed from discs that are
protected (pages 39, 87).
≥If dubbing is carried out using any mode other than [High Speed],
markers will not be recorded.
[HDD] [RAM] [DVD-R]
≥The markers are ordered by time. This means that the marker
numbers can change when you add and erase markers.
[DVD-V] [CD] [VCD]
≥This feature only works if the elapsed playing time of the disc is
shown on the unit’s display.
≥Some subtitles recorded around the marker may fail to appear.
≥The markers are cleared if you change the TV system currently
selected on the unit (page 75).
Disc
Picture
Sound
Play
Sound track
Subtitle
1
Audio channel
OFF
L R
Î Digital 2/0ch
Disc
Picture
Sound
Play
Repeat play
OFF
† †
1 s 10
††††††††††
Marker
A-B repeat
1 s 10
††††††††††
†††††
DVD(PAL).book24ページ２００３年５月１３日 火曜日 午後１２時３分