21
Chapter 2 General Settings
5
Enter the password (8-digit), and then
select “OK”.
6
Select “20-39”.
7
Select “21 Dept. Counter Mode”.
The Dept. Counter Mode screen appears.
For the subsequent steps, refer to the relevant
section.
Registering/Changing the Password
(Department Code)
You can register/change the password
(department code) of each department.
Refer to Registering/Changing the
Password (Department Code) (see page
22).
Clearing the Total Counter
You can clear the total departmental counter.
Refer to Clearing the Total Counter (see
page 23).
Printing a Departmental List or Report
You can print a departmental counter list, a
user settings list, or a management settings
list by user.
Refer to Printing a Departmental List or
Report (see page 24).
Changing the Departmental Count
You can change the departmental counter.
Refer to Changing the Departmental
Counter (see page 24).
Changing the Departmental Limit
You can change the departmental limit.
Refer to Changing the Maximum Prints (see
page 26).
To Next Page
Loading...
