Panasonic DP-C265

34
Chapter 3 Copier Settings
5 - 9 08 Digital Skyshot
Mode
Enable or disable the Digital Skyshot mode.
•No
The Digital Skyshot mode is disabled.
• Normal
Skyshot is used with standard quality.
• Quality
Skyshot is used with better quality than
“Normal”.
z Refer to Example : Digital Skyshot
Mode (see page 40).
No, Normal, Quality Normal
09 Manual Skyshot
Mode
Enable or disable the Manual Skyshot
mode.
•Off
The Manual Skyshot mode is disabled.
•M1,On
The image is copied in pre-registered M1
size.
(Standard setting : 70 x 160 mm)
•M2,On
The image is copied in pre-registered M2
size.
(Standard setting : 95 x 220 mm)
•M1,M2,On
Copied in pre-registered M1 or M2 size.
z Refer to Example : Manual Skyshot
Mode (see page 41).
Off,
M1,On,
M2,On,
M1,M2,On
Off
10 - 14 10 G-Cl. Detect
Mode
Set the Ground Colour Detection mode. Tip, Area Tip
11 Sort Priority ADF Selects the sort priority when using the
ADF.
z Shift, Staple, Group
When the optional Paper Transport Unit
is installed, this setting is available.
None, Sort, Shift,
Staple, Group, Rotate
Sort
12 Sort Priority Glass Selects the sort priority when using the
Platen Glass.
z Shift, Staple, Group
When the optional Paper Transport Unit
is installed, this setting is available.
None, Sort, Shift,
Staple, Group, Rotate
None
13 Stamping Default
Mode
Set the default Stamping mode. Page, Date, Issue,
Text
Page
14 Page Numbering
Style
Set the Page Numbering Style. -n-,
n/m
-n-
General User Mode
No. Parameter Comments Selective Item Standard
Setting