35
Chapter 3 Copier Settings
15 - 19 15 Img. Repeat
Dotted Line
Set whether to print perforations between
copy images in image repeat copying.
•None
Perforations are not printed.
•Print
Perforations are printed.
None, Print Print
16 Staple Position
Setting
Set the default stapling position. Top R, Top L,
Centre L, T Centre,
Centre R
(R: Right, L: Left,
T: Top)
Top L
17 Hole Punch
Default
Set the default punch. Off, On Off
18 Double Exposure Set the default double exposure. Off, On On
19 Mirror Default Enable or disable the Mirror mode. Off, On Off
20 - 24 20 Add User Colour Set the ratio of cyan, magenta, and yellow
and register the mixed Colour. (0 to 100%)
01 to 06
21 Modify User
Colour
When registering “20 Add User Colour”,
modify a registered Colour.
22 Delete User
Colour
When registering “20 Add User Colour”,
delete a registered colour.
24 Key Operator
Mode
Enter the Key Operator Password to display
the Key Operator Mode (see page 36).
00000000
General User Mode
No. Parameter Comments Selective Item Standard
Setting
Perforations
To Next Page
Loading...
