54
Chapter 4 Fax/Email Settings
120 - 159
122 Dial Prefix Set the Dial Prefix number (up to
4 digits).
z When the machine detects a
10-digit telephone number
(excluding any characters such
as “-”) being dialled, it will
automatically append the
preset Dial Prefix number.
z When the telephone number is
less or more than 10-digit in
length, the Dial Prefix number
is not appended.
z This feature is available in
certain countries only.
125 Confirm Stations Set whether to confirm the
destinations.
When set to “Valid”, the
document cannot be sent unless
the destination is confirmed.
z For details about the Confirm
Stations function, refer to
Confirming the Destination in
the Operating Instructions (For
Facsimile and Internet Fax) of
provided CD-ROM.
Invalid, Valid Invalid
131 Job Tracking Set the Job Tracking under the
following conditions.
z When “75 User
Authentication” in the General
Settings is set to “On” (Copy,
Fax, Scan, or Print) and “54
Fax Forward” in the Fax
Parameters is set to “Invalid”.
None, Tx (Send), Rx
(Receive), Tx & Rx
(Send & Receive)
None
132 Via Fax Server Set to “Valid” to enable the
RightFax function.
Invalid, Valid Invalid
133 Job Build and SADF Mode Set “Yes” to use the Job Build
and SADF function.
z This function is only available
when “05 Memory (HOME)” in
Fax/Email Settings > Fax
Parameters is set to “On”.
z Function Parameter “82 Quick
Memory XMT” (Fax/Email
Settings > Fax Parameters) is
not available for this function.
z Up to 255 pages can be stored.
When the number of pages
exceeds 255, the memory
becomes full.
No, Yes No
Fax Parameters
z The contents of Fax Parameter may differ depending on the each country’s regulation or specification.
No. Parameter Comments Selective Item
Standard
Setting
To Next Page
Loading...
