55
Chapter 4 Fax/Email Settings
120 - 159
135 Junk Fax Filter z 00 Junk Fax Filter
When set to “Valid”, the
machine will not receive the
faxes from the senders whose
numeric ID has been
registered as junk fax number.
z 01 Receive without ID No.
When set to “Valid”, the
machine will receive the faxes
from senders without numeric
ID registered.
z This setting is available only
when “00 Junk Fax Filter” is
set to “Valid”.
z 02 Received ID Print
When set to “Valid”, the
sender’s numeric ID and
received time are printed at the
bottom of the received faxes. If
the sender’s numeric ID is not
registered, only the received
time is printed.
z This setting is available only
when “00 Junk Fax Filter” is
set to “Valid”.
z 03 ID No. Registration
Register fax numbers as junk
fax number.
z Up to 30 fax numbers can be
registered for junk fax
number.
z Up to 20 digits (including
numerals, blank space, and
+ symbol) can be registered
for a fax number.
z When comparing the
sender’s numeric ID to the
registered junk fax numbers,
blank spaces between
numbers and “0” at the
beginning of the number are
ignored.
Invalid, Valid
Invalid, Valid
Invalid, Valid
Invalid
Valid
Valid
136 Restrict Direct Dial Enable or disable the Restrict
Direct Dial function.
When set to “Valid”, manual input
of destination and the use of the
“Redial” button are not available.
Invalid, Valid Invalid
Fax Parameters
z The contents of Fax Parameter may differ depending on the each country’s regulation or specification.
No. Parameter Comments Selective Item
Standard
Setting
Continued on the next page...