56
Chapter 4 Fax/Email Settings
120 - 159
137 Re-enter Direct Dial When set to “Valid”, manual input
requires the user to enter the
destination twice, and
transmission takes place only
when the entered destinations
are matched.
If the “Redial” button is selected,
the Number Pad screen appears
prompting to enter the fax
number for confirmation.
The “Monitor” button cannot be
used.
z This setting is not available
when the Restrict Direct Dial
function is set to “Valid”.
Invalid, Valid Invalid
140 LAN RLY XMT Request Enable or disable the LAN Relay
Transmission Request Function.
z Refer to Example : Initial
Sending Station (LAN Relay)
(see page 76).
Invalid, Valid Invalid
141 LAN XMT Reduce Enable or disable Reduced
transmission when transmitting a
large sized original via Internet
Fax.
When set to “Valid”, a B4/A3/
Ledger sized original is reduced
and transmitted as A4/Letter
sized paper.
z Refer to Emailing an A3-
Sized Document in the
Operating Instructions (For
Facsimile and Internet Fax) of
provided CD-ROM.
Invalid, Valid Invalid
142 Relay XMT Enable or disable the LAN
Relayed Transmission function.
z Refer to Example : Relay
Station (LAN Relay) (see
page 78).
Invalid, Valid Valid
143 Relay XMT Report Select the printing attributes for a
LAN Relayed transmission
report.
•Off
Not send.
•Always
Always sends.
• Inc Only
Sends only if communication
has failed.
z Refer to Example : Relay
Station (LAN Relay) (see
page 78).
Off, Always, Inc Only Always
Fax Parameters
z The contents of Fax Parameter may differ depending on the each country’s regulation or specification.
No. Parameter Comments Selective Item
Standard
Setting
To Next Page
Loading...
