91
Chapter 6 Printer Settings
15 - 29 29 Job Polling Time Set the Job Polling Time.
Select “Input”, and then enter
the job polling time.
2 to 255 (Sec) 4 (Sec)
30 - 44 30 Bindery Mode Set the Bindery mode when
using the NetWare.
Off, On Off
31 File Server Name 1 Set file server names. Up to
8 names can be set.
Up to 31 characters
32 File Server Name 2
33 File Server Name 3
34 File Server Name 4
35 File Server Name 5
36 File Server Name 6
37 File Server Name 7
38 File Server Name 8
39 NDS Tree Set the NDS tree. Up to 31 characters
40 NDS Context Set the NDS context. Up to 77 characters
41 Print Server Name 1 Set print server names. Up to
8 names can be set.
Up to 31 characters
42 Print Server Name 2
43 Print Server Name 3
44 Print Server Name 4
45 - 59 45 Print Server Name 5
46 Print Server Name 6
47 Print Server Name 7
48 Print Server Name 8
49 Job Time Out Set the Job Time Out.
Select “Input”, and enter the job
time out.
4 to 255 (Sec) 10 (Sec)
50 Use MCP Server Set “Yes” to use MCP (Memory
Card Printing) server.
No, Yes No
No. 29 to 49
After setting any of these parameters, turn the
machine’s power switch Off, and then On again.
Key Operator Mode
No. Parameter Comments Selective Item Standard
Setting
Continued on the next page...
To Next Page
Loading...
