With a TV
With a TV
The motion pictures and still pictures recorded by this unit can be played back on a TV.
• Use the AC adaptor to free you from worrying about the battery running down.
1 Connect this unit and a TV.
O AV/S cable (supplied)
• Insert the plugs as far as they will go.
A/V
* If the TV has an S Video terminal, also connect the
S Video plug to it. This allows you to enjoy more
beautiful pictures.
_j
o
L,.
"6
2
3
Turn on this unit, then rotate the mode dial to select [] or l_.
Change the input channel on the TV.
• The channel set will differ depending on the terminal to which the unit is connected.
Start playback on this unit.
The image and audio are output on the TV.
• If the image or audio from this unit is not output on the TV
• Check that the plugs are inserted as far as they go.
• Check the connected terminal.
• Check the TV's input setting (input switch). (For more information, please read the
operating instructions for the TV.)
• If the images are not displayed correctly on a wide-
screen TV, adjust the aspect setting on the TV.
(Refer to the operating instructions of the TV for
details.) If the pictures are displayed squeezed
horizontally on a regular TV (4:3), change the
[TV ASPECT] setting on this unit (4 105)
104
LSQT1011
To Next Page
Loading...
