Quick Guide
Quick Guide
• Charging the battery
1 Connect the AC cable to the AC adaptor
and the AC outlet.
2 Put the battery on the battery mount by
aligning the mark, and then securely
plug it in.
• Fitting the battery
Push the battery against the battery holder
and slide it until it clicks,
• How to turn on/offthe power
While pressing the button O, set the OFF/
ON switch to ON/OFF.
OFF ON
OFF ON
©
• Inserting/removing a disc
1 Slide the DISC EJECT lever once and
release it.
• Removing the battery
While sliding the BATTERY RELEASE lever,
slide the battery to remove it,
D(SCEJECT
Open the cover of the disc compartment
by hand and insert/remove the disc,
.m
o
M--
m
BATTERY
RELEASE
3 Push the section marked
"PUSH CLOSE" on the cover of the disc
compartment to close the cover.
11
LSQT1011
To Next Page
Loading...
