Creating a DVD-Video disc on a computer (Windows)
Creating a DVD-Video disc on a computer
(Windows)
Using DVD-MovieAIbumSE and DVDfunSTUDIO, you can create a DVD-Video disc (DVD-RW/
DVD-R disc) from the images recorded on this unit.
• Before using DVD-RW (VR format) on a computer, be sure to finalize it on this unit.
• When using DVD-MovieAIbumSE or DVDfunSTUDIO, log on to your computer as Administrator
with a Iogin name equally authorized. If you log on with a Iogin name other than Administrator,
you cannot use the applications.
• The End User License Agreement is displayed when the software is first started so read carefully
through its terms and conditions, then click [I agree.].
/_Connect this unit to the AC adaptor.
1 Insert a DVD-RAM or DVD-RW (VR format) with recorded images in the
unit, turn on the unit and then rotate the mode dial to select _;_].
2 Connect this unit and a computer.
O USB cable (supplied)
• Insert the plugs as far as they will go. The unit
and computer will not operate properly if the
plugs are not inserted fully.
• Do not use any other USB cables except the supplied
one. (Operation is not guaranteed with any other USB
cables.)
E
o
o
127
LSQT1011
To Next Page
Loading...
