Installation (Windows)
Installation (Windows)
When installing the software, log on to your computer as the Administrator or with a user name with
equivalent authorization. (If you do not have authorization to do this, consult your manager.)
Do not connect the USB cable before installing the DVD.RAM Driverl
If the DVD-RAM Driver is installed after connecting this unit and the computer with the
USB cable, this unit may not be correctly recognized by the computer.
(The DVD-RAM Driver has a driver for USB connection.)
• Before starting the installation, close any other software applications which are running.
• Do not perform any other operations on your computer while the software is being installed.
• Install DVD-RAM Driver and then install DVD-MovieAIbumSE or DVDfunSTUDIO.
1 Insert the CD-ROM into the computer.
The [Setup Menu] screen will appear.
• If the [Setup Menu] screen does not appear, double-click the CD-ROM drive
icon in [My Computer].
2 Click [DVD-RAM Driver].
• The software application may not run properly if you cancel the installation at _:i_
any point e.g. by pressing [Cancel].
f,.
Q.,
E
o
o
3 Click [Driver and Formatter Setup].
• If an [Information] or [Question] message appears, continue to follow the
on-screen messages to install it.
4 Click [Next].
118
LSQT1011
To Next Page
Loading...
