5 Read carefully through the End User License
Agreement (-> 117), then click [Yes].
• You cannot install the application if you click [No].
Installation (Windows)
6 Click [Next].
Continue to follow the on-screen messages to install it.
7 When installation is complete, some notes will appear:
Check the contents, then click [x ] at the top right of ................
window.
Click [Finish].
Windows 2000 only:
The detection of device will start, after which it will take several minutes
for the computer to detect the device. When detecting the device is
complete, a message that prompts you to reboot will appear:
Click [Yes].
The computer must be rebooted for the driver to work. I
• If any trouble has occurred while installing DVD-RAM Driver:
When the [Block] is selected in the [Driver Signing Options] in the [System Properties], the
installation procedure will not complete. Select [Warn] and try again.
To check and change the setting, select [start] _ ([Settings] _) [Control Panel] _ ([Performance
and Maintenance] _) [System] and select [Driver Signing] of the [Hardware] tab.
• About the [RAMASST] support tool:
[RAMASST] is a support tool for Windows XP that disables the drive's CD writing function so that
data can be written from a computer to a DVD-RAM.
When you install the DVD-RAM Driver, [RAMASST] is automatically installed and displayed in
[Startup].
E
o
o
119
LSQT1011
To Next Page
Loading...
