Various recording functions
You can record still pictures on an SD card using the timer.
_ Rotate the mode dial to select 0.
1 Press the joystick. Then move the joystick down
to display the icon shown in the illustration.
2 Move the joystick left to select [_p].
_33
c-
O
O
n_
3 Press the PHOTO SHOT button.
After the recording lamp and the [_] display flashes for approx. 10 seconds, a still picture will
be recorded.
• After recording, the self-timer is canceled.
• If you press the PHOTO SHOT button halfway and then fully, the subject is focused when the
button is pressed halfway.
• When you press the PHOTO SHOT button fully, the subject is focused just before recording.
To stop the timer midway through
Press the MENU button. (The self-timer setting is canceled.)
• If you turn off the power, the self-timer standby
mode is canceted
• Depending on the time taken to bring the subject
into focus, the recording may take longer than set to
start
i 64
LSQT1011
To Next Page
Loading...
