Using an SD card on a computer (Macintosh)
1
2
Double-click the [NO_NAME] icon.
The folders on the SD card are displayed.
Select the file in the [IOOCDPFP] folder to copy and drag and drop it to
the destination copy folder.
• Example folder structure of an SD card:
CsIM
IOOCDPFP
• JPEG format still pictures (IMGA0001 .JPG etc.) are stored in the [100CDPFP] folder.
These can be opened with picture software that supports JPEG pictures.
• Up to 999 files can be recorded in the [100CDPFP] or other such folder.
• The DPOF setting files are recorded in the [MlSC] folder.
• Do not use the computer to delete the SD card's
folders Otherwise, it may no longer be possible for
this unit to read the SD card
• Always use this unit to format SD cards
• When data not supported by this unit has been
recorded on a computer, it will not be recognized by
this unit
Drag the [NO_NAME] icon into the Trash and then disconnect the USB
cable.
• if you disconnect the USB cable while the access
tamp is on or white _ appears on the LCD monitor,
it may damage the data.
E
O
o
141
LSQT1011
To Next Page
Loading...
