Creating a DVD-Video disc on a computer (Windows)
3 (On the computer)
Select [start] --_ [All Programs (Programs)] --_ ............._
[Panasonic] --_ [DVD-MovieAIbumSE] --_ ;,
[DVD-MovieAIbumSE].
DVD-MovieAIbumSE starts and the images recorded on the disc are displayed.
When starting DVD-MovieAIbumSE, the [Mount Information] dialog box may appear or the
recorded images may not be shown. If this occurs, try the following procedure. If there are
multiple drives, a drive other than this unit may be selected.
1) Click [Preference] on the dialog box or _ ([Preference]) button at top right of
DVD-MovieAIbumSE screen, and then click the [Device setting] tab.
2) Choose the drive where the disc is loaded in the [Drive Select] column, and then click [OK].
4 (When using a DVD-RAM only)
Edit the images on the disc as required.
5 Click [] ([Additional]) and select [File Export] --_
[Export all titles] or [Export a title].
6 Set the export settings in the [Export all titles] ([Export a
title]) screen and click [Start].
• It is recommended that you do not change the settings displayed oil the screen.
f,..
Q.,
E
o
o
When export is complete, a message will appear.
Check the small box for [Eject the disc being used.],
and then click [Yes].
DVD-MovieAIbumSE automatically closes and DVDfunSTUDIO
automatically starts.
8 Insert a brand-new DVD-RW or DVD-R disc into the unit.
128
LSQT1011
To Next Page
Loading...
