Indications
CANNOT RECORD. Data writing to the disc or card has failed.
NO DATA. There are no images recorded on the disc or card.
THIS DISC IS
You inserted an incompatible disc (copy-protected discs, etc.).
INCOMPATIBLE.
PLEASE CHECK THE You inserted a disc that cannot be read on this unit (a disc
DISC. recorded in PAL video format etc.).
You inserted a disc that does not meet the DVD standard for
quality and performance so you may not be able to record
normally. Refer to the following support site for information
RECOMMENDED TO USE
PANASONIC DISC about discs that have been confirmed as compatible by
Panasonic.
http:llpanaeonic.co.jplpavclgloballcsle_cam
(This website is in English only.)
AGS MODE ON -REC
The AGS function is activated. (4 49)
PAUSED
A finalized DVD-RW (Video format) or DVD-R has been
CANNOT RECORD. inserted. After finalizing, the discs become play-only and cannot
(THIS DISC IS FINALIZED) record. If you un-finalize a DVD-RW (Video format), it can be
used for recording. (4 10!)
CANNOT RECORD. DISC
IS FULL.
The disc is fulI or the number of scenes has reached the
CANNOT RECORD. THE maximum limit so no further data can be recorded. Delete
NUMBER OF SCENES HAS unnecessary scenes (4 8!) or insert a new disc.
EXCEEDED THE MAXIMUM
LIMIT.
CANNOT OPERATE.
TEMPERATURE IS HIGH. The temperature of the unit is high so it cannot be operated.
Turn off the power, wait until the unit cools and then turn on the
PLEASE TURN OFF AND
WAIT A WHILE. power again.
DVD-R cannot be un-finalized
CANNOT UN-FINALIZE DVD-RW (VR format) cannot be un-finalized. DVD-RW (VR
THIS DISC. format) after finalization can be recorded and edited in the same
way as DVD-RW (VR format) before finalization.
This card is not compatible or it cannot be recognized by the
CHECK CARD.
unit.
The write protection switch on the SD Memory Card is set to
CARD LOCKED.
LOCK. (4 26)
0
147
LSQT1011
To Next Page
Loading...
