Troubleshooting
With a computer (Windows)
O
Even if connected by the
USB cable, this unit is not
recognized by the
computer.
DVD-MovieAIbumSE is
started, the [Mount
Information] dialog box
appears.
An image that should
have been recorded does
not appear when
DVD-MovieAIbumSE is
started.
DVD-RW (Video format)
or DVD.R cannot be
played back on
DVD,MovieAIbumSE.
The DISC EJECT lever
does not work when the
unit is connected to the
• Have you set this unit to the correct mode?
The unit is not recognized if it is set to a recording mode. Set
it to a playback mode. If it is set to card playback mode,
disconnect the USB cable, set [USB FUNCTION] to
[PC CONNECT) and then reconnect the USB cable.
• Select another USB terminal on the computer.
• Check the operating environment. (4 114)
• Turn on the power to this unit.
• You inserted an incompatible disc,
A disc other than a DVD-RAM or a DVD-RW (VR format) is
loaded in the drive: DVD-MovieAIbumSE cannot be used for
media other than DVD-RAM or DVD-RW (VR format).
• If there are multiple drives, a drive other than this unit may
be selected,
Click the [Preference] button in the dialog box, click the
[Device setting] tab to choose the drive where the disc is
loaded in the [Drive Select] column, and then click [OK].
• If an error message appears even after a compatible disc is
inserted, packet writing software may be installed in your
computer. Uninstall the packet writing software.
• If there are multiple drives, a drive other than this unit may
be selected,
Click the [Preference] button at top right of
DVD-MovieAIbumSE screen, click the [Device setting] tab to
choose the drive where the disc is loaded in the
[Drive Select] column, and then click [OK].
• DVD-MovieAIbumSE does not support playback or data
read of DVD-RW (Video format) or DVD-R.
Use optional-user provided DVD-Video playback software to
play back DVD-RW (Video format) or DVD-R on the
computer.
• The DISC EJECT lever does not work after the unit is
connected to the computer.
Use Windows Explorer to right-click the drive icon and
execute [Eject]. Or use the software's eject button to eject
the disc.
computer. • After files are exported from DVD-MovieAIbumSE, a
confirmation message is displayed about ejecting the disc.
Select [Eject the disc being used.].
156
LSQT1011
To Next Page
Loading...
