Parts identification and handling
25 Card slot cover (-) 34)
26 Card slot (-_ 34)
27 Tripod receptacle (-_ 18)
28 Card access lamp (-_ 34)
29 Battery release lever [BATTERY RELEASE]
(-> 28)
30 Speaker
31 LCD monitor (-_ 19)
Due to limitations in LCD production
technology, there may be some tiny bright or
dark spots on the LCD monitor screen.
However, this is not a malfunction and does
not affect the recorded picture.
32 Mode select switch [AUTO/MANUAL/FOCUS]
(-> 49, 70)
33 Power LCD button [POWER LCD] (-> 47)
34 Reset button [RESET] (-_ 155)
_33
._= 35 Disc eject lever [DISC EJECT] (-> 32)
u_ 36 Disc/computer access lamp [ACCESS/PC]
¢ (-> 32, 124, 139)
o 37 Disc compartment (-> 32)
38 Grip belt (-> below)
m
39 Shoulder strap fixture (-_ 17)
25 26 27 28 29
i I
35 36 37 38
.33
34
Using grip belt
Adjust the belt length so it fits your hand.
(U.S,A, only)
When this unit is purchased, a sensor tag is attached to the
grip belt. Remove the tag before use.
O Flip the belt.
Take off the tag.
I_t Replace the belt.
Adjust the belt length and the pad position.
O Flip the belt.
Adjust the length.
_) Fix the belt.
16
LSQT1011
To Next Page
Loading...
