Parts identification and handling
Attach the lens cap to protect the surface of the lens.
1 Pass the end of the lens cap cord through the belt.
2 Pass the lens cap through the loop made by itself.
o_
o
m
3 To attach or remove the lens cap, hold both sides
of the lens cap with the tips of your finger and
thumb.
During recording
The lens cap removed can be attached to the lens cap fixture.
This is a hole for attaching the unit to the optional tripod.
(Please carefully read the operating instructions for how to
attach the tripod to the unit.)
• When the tripod is used, the card slot cover cannot be
opened. Insert an SD card before attaching this unit to the
tripod. (4 34)
LSQT1011
To Next Page
Loading...
