Parts identification and handling
This remote control can be used from different high and low angles. It is also handy when a tripod is
used. When you do not use the remote control, attach the clip to the grip belt. Left-handed users
can use this unit more easily.
1 Recording start/stop button [REC] -- 1
2 Zoom lever [W/T] --2
3 Photoshot button [PHOTO SHOT]
=3
O
m
• Connect the Magic Wire Remote Control to the unit
Plug the Magic Wire Remote Control into the
REMOTE/MIC terminal as far as it goes.
• If the pin plug of the remote control is not inserted • Before using, make sure that the plug is inserted
securely into the REMOTE/MIC terminal as far as it secureIy into the terminal as far as it will go.
will go, normal operation may not be ensured
• About the clip (on the backside)
When you move with the clip fitted to your pocket or elsewhere, beware of knocking
over the tripod or causing the unit to fall off the table.
LSQT1011
To Next Page
Loading...
