60
Setting date and time
• Changing the date and time display style
Press the MENU button, then select [ _[_, SETUP] _ [ [] DATE/
TIME] _ desired display style and press the joystick.
• You can also show or change the date and time display by
repeatedly pressing the DATE/TIME button on the remote control.
[DATE] [D/T] [OFF]
I l 3:30PM
12.15.2006 12.15.2006
• The recording time is not displayed in disc playback mode.
• Changing the display style
Press the MENU button, then select [ _ SETUP]
[ [] DATE FORMAT] _ desired display style and press the
joystick.
i
--..- ¥/M/D D/M ¥
2og6.!2.1 12.15.2oo6 ! .lz2og6
• The date and time function are driven by a buiIt-in
lithium battery.
• Make sure to check the time before recording.
• If the time display becomes [--], the buitt-in tithium
battery has run down Use the following steps to
charge the battery When you turn on the power for
the first time after charging, a message asking you
to set the date and time wilt appear Select [YES]
and set the date and time
To recharge the built-in lithium battery
Connect the AC adaptor or attach the battery to the
unit, and the built-in {ithium battery will be
recharged. Leave the unit as is for approx
24 hours, and the battery wilt save the date and
time for approx. 6 months. (Even if the OFF/ON
switch is set to OFF, the battery is etiIl being
recharged.)
L 46
LSQT1011
To Next Page
Loading...
