Panasonic EBL128 - Page 4

Panasonic Eco Solutions Nordic AB
MEW01622 Rev: - EBL128 Planning Instructions V2.0.x
2
4.1.3 Short-circuit on the COM loop ___________________ 20
4.2 Programmable voltage outputs (S0-S1) ________________ 20
4.3 Programmable relay output (R0) ______________________ 21
4.4 Relay output for routing equipment (fault tx) (R1) ________ 21
4.5 Programmable input (I0) ____________________________ 21
4.6 24 V DC power supply outputs _______________________ 22
4.7 RS232 interfaces __________________________________ 22
4.8 RS485 transceiver (option) __________________________ 22
4.9 Power supply _____________________________________ 22
4.10 Internal Power supply ______________________________ 23
5 Expansion boards 458x _____________________ 24
5.1 Expansion board address setting ______________________ 25
5.2 8 zones expansion board 4580 _______________________ 25
5.2.1 Type of zone line input _________________________ 26
5.2.2 Input states __________________________________ 26
5.3 8 relays expansion board 4581 _______________________ 27
5.4 Inputs and outputs expansion board 4583 _______________ 28
5.5 I/O Matrix board 4582 _____________________________ 29
5.5.1 Generic _____________________________________ 30
5.5.2 Fan control __________________________________ 31
5.5.3 Zone control _________________________________ 31
6 Peripheral devices __________________________ 32
6.1 COM loop units ___________________________________ 32
6.1.1 Input units ___________________________________ 34
6.1.2 Addressable I/O units __________________________ 45
6.1.3 Alarm devices (addressable) _____________________ 47
6.1.4 Short circuit isolators (addressable) _______________ 49
6.1.5 Units for Hazardous (Ex) areas ___________________ 51
6.1.6 Other COM loop units __________________________ 53
6.2 Units connected to the RS485 interface ________________ 55
6.2.1 External Fire Brigade Panels _____________________ 56
6.2.2 Alert Annunciation Units _______________________ 57
6.2.3 External Presentation Units ______________________ 58
6.2.4 German Fire Brigade Panels _____________________ 59
6.3 Units connected to the RS232 interface J5 ______________ 59
6.3.1 Web-servers __________________________________ 59
6.4 Units connected to the RS232 interface J3 ______________ 60
6.5 Other units _______________________________________ 61
6.5.1 Alert Annunciation Controllers ___________________ 61
6.5.2 External LEDs ________________________________ 61
6.5.3 Alarm devices (sounders, etc.) ___________________ 62
6.5.4 Door release magnets __________________________ 62
6.5.5 Boxes _______________________________________ 62
7 Programmable inputs _______________________ 63