Panasonic EBL128 - Page 5

Panasonic Eco Solutions Nordic AB
MEW01622 Rev: - EBL128 Planning Instructions V2.0.x
3
7.1 Control unit Input I0 & Inputs and Outputs exp. board 4583,
Input 0-4 ______________________________________________ 64
7.1.1 Not supervised ________________________________ 64
7.1.2 Supervised ___________________________________ 64
7.2 3361 unit Inputs In0 / Z & In1 _______________________ 65
8 Input programming ________________________ 66
8.1 Type (trigger conditions) ____________________________ 66
8.2 Logic ___________________________________________ 69
8.2.1 Not supervised (default) ________________________ 69
8.2.2 Supervised ___________________________________ 69
9 Programmable outputs ______________________ 70
9.1 Control unit outputs S0 – S1 _________________________ 71
9.2 Control unit output R0 _____________________________ 72
9.3 8 relay outputs expansion board 4581 Output 0 – Output 7 _ 72
9.4 Inputs and Outputs expansion board 4583 Output 0 – 1 ____ 72
9.5 The 3361 unit outputs Re0 – Re1 _____________________ 72
9.6 The 3364 unit outputs VO0, VO1 & VO2 ______________ 73
9.7 The 3377 / 4477 unit output (siren) ____________________ 73
9.8 The 3378 unit output (sounder) _______________________ 73
9.9 The 3379 unit output (sounder) _______________________ 73
9.10 The 4380 unit output (beacon) _______________________ 73
9.11 The 4383 unit output (Light indicator) _________________ 73
10 Output programming _______________________ 74
10.1 Type ___________________________________________ 74
10.2 Logic ___________________________________________ 75
10.3 Supervised _______________________________________ 75
10.4 Output signal period _______________________________ 75
10.5 Control expression ________________________________ 78
10.5.1 Trigger conditions _____________________________ 78
10.6 Logical operators __________________________________ 84
10.6.1 Control expression examples ____________________ 84
11 Interlocking function _______________________ 88
11.1 Interlocking programming __________________________ 88
11.1.1 Interlocking output ____________________________ 88
11.1.2 Interlocking input _____________________________ 88
11.1.3 Interlocking combination _______________________ 88
11.2 Interlocking indications _____________________________ 90
11.3 Information of interlocking combinations (H9) __________ 90
11.3.1 Display interlocking information (H9/C1) __________ 90
11.3.2 Activate interlocking output (H9/C2) ______________ 90
11.3.3 Reset interlocking output (H9/C3) ________________ 91
11.3.4 Disable interlocking output (H9/C4) _______________ 91
11.3.5 Re-enable interlocking output (H9/C5) _____________ 91
11.4 Interlocking control expressions ______________________ 91
12 Fire Door Closing function __________________ 92