3-13
Maintenance
(3) Adjustment of the tamper bar swing range
Remove all the paper from the bin unit.
1
Remove the right cover and set the dip switch
on the sorter controller PCB as shown.
(SW3: FA-S620, SW1:FA-S660)
2
3
Place the A4 or LTR copy paper (1 sheet) in
the bin unit as shown.
4
Pressing the push switches (SW2 and SW1/
SW3) on the sorter
controller PCB, move the guide bar to touch
the copy paper slightly.
• SW1 (FA-S620), SW3 (FA-S660):
The guide bar approaches to the
copy paper.
• SW2: The guide paper goes away from
the copy paper.
1
ON
23456
1
ON
23456
1
ON
23456
1
ON
23456
(When using A4 copy paper)
FA-S620
FA-S660
(When using LTR copy paper)
(When using A4 copy paper)
(When using LTR copy paper)
Bring paper into contact
A4/LTR
Copy
To Next Page
Loading...
