Panasonic FP-7818

3-15
Maintenance
1
ON
23456
1
ON
23456
(4) Adjustment of the staple position (continued)
Place about 5 sheets of copy paper (A4 or
LTR) into the top bin.
3
Pressing the push switch on the sorter
controller PCB, move the stapler unit to the
staple position.
(SW1:FA-S620, SW3:FA-S660)
4
5
Press the push switch to check the staple
position.
(SW1:FA-S620, SW3:FA-S660)
• When the staple position is too outer, press
the push switch (SW1/SW3) first then press
the other (SW2) to adjust the staple
position.
• When the staple position is too inner, press
the manual staple key to return the staple
unit to the home position and readjust the
staple position with the push switch.
(SW1:FA-S620, SW3:FA-S660)
6
Press the manual staple key.
• The value of the adjustment is memorized.
7
Turn OFF all the dip switch (SW3: FA-S620,
SW1:FA-S660).
FA-S620
FA-S660
SW1
SW2 SW3
SW1 SW2
SW3
Stapling
forward
Stapling
forward
A4/LTR
Staple
Feed direction
6 ± 2.5mm