Unpacking/
Installation
6-13
Location Procedure
Check
5
(1) Pull out the lower cassette.
(2) Remove the rail stopper. (1 screw)
(3) Remove the lower cassette.
6
(1) Remove the lower cassette rail
fixing screw. (front side X 1)
(2) Install the sorter receiving bracket
(front), together with the lower
cassette rail. (2 screws just re-
moved)
7
Re-install the lower cassette and rail
stopper.
9
Remove the system console left
cover. (2 screws)
1
3
2
Rail stopper
1
2
Sorter receiving bracket (front)
8
(1) Re-install the left cover and rear
cover.
(2) Close the exit door and front door.
To Next Page
Loading...
