5-22
To Clear the Service Call indicator
Re-input the F5-70 and F5-73.
Set the copier to service mode and press Multi-Copy key “5”
Press Print key.
Scroll the display menu until code number 70 is indicated with arrow keys ( ),
then touch “70” key.
Touch desired PM cycle key and OK key.
When the CANCEL key is touched, the desired PM cycle will be not accepted.
Scroll the display menu until code number 73 is indicated with arrow keys ( ),
then touch “73” key.
Touch desired PM cycle key and OK key.
When the CANCEL key is touched, the desired PM cycle will be not accepted.
Press Clear/Stop and User Preset key to escape service mode.
To Next Page
Loading...
