5-21
Troubleshooting
Code Item Function (Factory setting)
94* Check size M2 X Length of paper vertical position to paper 95
feed direction
95 Factory use size unit change 0: AB, Janpanese 1 (for American)
1: inch 2 (for European)
2: AB, European
96-97 Not used
98 Factory use paper size sensor 0: Yes 1
change 1: No
99 Not used
* F6-91~94; check size = (input value x 5) mm.
* F6-91, 93; Even number only.
To Next Page
Loading...
