2.1 GTWIN User Interface
2.1.1 Names and Functions of Parts of the Screen
All the functions that can be used in GTWIN are displayed in menus.
Functions commonly used from the menu bar are displayed as icons.
The functions are separated into six types of toolbars.
Use this window to manage screen data and configure system settings. On
the Screen Manager tab, you can select one of three display methods: map,
list, or thumbnail. On the System Setting tab, you can open the setup dialog
boxes of each function directly.
The parts used during screen creation are displayed here. You can switch
displayed parts between libraries. You can also create user-defined libraries.
Screen data editing
window
This area is used to edit the parts, character strings, and graphics displayed
on the screen.
The screen number, screen name, and name of the folder where the screen
is saved are displayed as a set.
The results of the device search function are displayed here.
You can use this window to search for and edit character strings used in
parts or screens. When you are using language switching, you can enter
character strings in the list.
To Next Page
Loading...
