Panasonic GT series - Part Style Change Function

4.1 Useful Functions for Editing/Setting
4-5
4.1.3 Part Style Change Function
In GTWIN Ver. 3, you can easily change the style of parts that you have placed. You can
transfer the set attributes of the part as-is, which enables flexible support of design changes.
 Design changes of lamp switch parts
The following section explains the procedure for converting a switch part that has been placed
from the [Switch] library into a switch of a different design.
1. Double-click a part that has been placed.
The [Lamp Switch Part] dialog box, which can be used to set part attributes, is
displayed.
2. Select the [Style] tab.
3. Select the design library, and then press [Select].