4.1 Useful Functions for Editing/Setting
4.1.4 Custom Part Creation Function
You can use this function to create user-defined parts. You can edit custom parts with the
following operations.
Creating custom parts
The following explanation assumes that a custom part has been placed on a base screen.
1. Click a placed custom part. Then, on the [Edit] menu, select [Edit Screen].
Alternatively, select [Edit Screen] in the context menu that is displayed
when you right-click the part.
You can now edit the custom part.
2. Use functions such as drawing, text entry, and bitmap insertion to edit the
design.
3. Press [OK].
The custom part is placed in the screen data.
Excluding the style, you can set the same part attributes for lamp switch
parts registered to the parts library and for custom parts.
For the conventional GTWIN Ver. 2 and GT-series, it was only possible to
set over 16 replacements for custom parts. However, for GTWIN Ver. 3 and
the GT707-series, it is possible to also set up to 256 replacement messages
for standard message parts.
To Next Page
Loading...
