2.3.2 Parts Library Types
The parts library is organized as shown below.
Parts library
This parts library conforms to conventional GTWIN.
These parts have a function for turning the corresponding
PLC bit device ON/OFF. A variety of functions can be
assigned to these parts.
The display status of these parts changes depending on the
ON/OFF state of the corresponding PLC bit device.
These parts have a function for switching their display
status according to the value of the corresponding PLC
device.
Displays the numeric value of the PLC device on the GT
screen.
These parts have a function for displaying the changes in
the value of the referenced PLC device as a bar graph.
Graphs can be vertical or horizontal.
These parts have a function for displaying the date and
time according to the referenced clock (the GT clock/PLC
clock). A single clock part displays one of the following
items: year, month, day, hour, minute, second, or day of
week.
These parts have a function for displaying the changes in
the value of the referenced PLC device as a line graph.
These parts are used to monitor PLC devices allocated to
error statuses and to display an alarm message on the GT
or record the history of error occurrence, etc. in the internal
memory when an error occurs.
These parts are used to enter numeric values that you want
to display with data parts.
When you want to create user-defined parts, these parts
can be used to edit the display of the parts to use. Three
types are available: switch, lamp, and message.
Real
Metallic
Pastel
Icon
Blue, Green,
Orange, Red,
White, Yellow
These switch parts have been designed into real, metallic,
pastel, and icon styles.
These lamp parts have been designed into real, metallic,
and pastel styles.
Blue, Green,
Orange, Red,
White, Yellow
These parts have been prepared for use as the background
colors of each screen.
These parts are used to monitor the operation indicator
LEDs of the Panasonic PLC FP-XH-series.
To Next Page
Loading...
