Panasonic GT series - Setting Lamp Switch Parts

Creating Screens
3-22
3.4.2 Setting Lamp Switch Parts
This section explains how to set, as attributes, the operations of the switches when they are
selected.
1. Double-click lamp switch part SW0.
A dialog box for setting the attributes is displayed.
2. Select the [Switch Operation] tab.
3. In the [Operation Mode] list, select [Back to Previous Screen].
[Back to Previous Screen] is displayed under [Operation List].
4. Press [Add].
5. In the [Operation Mode] list, select [Change Language No.].
[Change Language No. (0)] is displayed under [Operation List].
6. Configure the same settings for SW1 and SW2.
In the [Language No. (0 - 15)] text box for SW1 and SW2, enter 1 and 2,
respectively.
 You can use the [Add], [Divert], [Delete], [Up], and [Down] buttons to edit
the operation mode.