Panasonic GT series - GTWIN Ver. 3 Usage Procedures; Section Overview

GTWIN Operations
2-14
2.5 GTWIN Ver. 3 Usage Procedures
2.5.1 Section Overview
This section explains the GTWIN basic operation procedures by separating them into the
following four steps.
 Operation procedures
Explanation
Main operations
①
Starting GTWIN
→ Displaying the file
manager
 Start GTWIN and create a new file. Select the GT and PLC models.
 Set the communication area with the PLC.
 When the sequence of operations is complete, the file manager will be
displayed.
②
Creating a base screen
→ Saving data
 Double-click a screen number in the file manager to open its base screen.
 Drag a part to place it on the base screen.
 Press [Save As] to save the data.
③
Transferring data to the
GT
 From GTWIN, select the data transfer screen.
 You can select the transfer method from transferring all the data, the
selected data, or the data that has been changed.
④
Exiting GTWIN
Exit GTWIN.