Panasonic GT series - Starting GTWIN → Displaying the File Manager

2.5 GTWIN Ver. 3 Usage Procedures
2-15
2.5.2 Starting GTWIN → Displaying the File Manager
This section provides the procedure covering the steps from starting GTWIN to displaying the
file manager.
 Procedure
1. Start → [All Programs] → [Panasonic Industry Terminal] → [GTWIN_V3]
→ [GTWIN_V3].
The [GTWIN] dialog box is displayed.
Option
Explanation
Create New File
Press this to create new screen data.
Open Existing File
Press this to read data that has been saved to disk.
Read From GT
Press this to read data that has been saved to the GT.
2. Press [Create New File].
The [Select Model] dialog box is displayed.
Option
Explanation
GT Model
Select the GT model. You can also select a vertically oriented
model.
PLC Model
Select the FP-series, FP7-series, or general-purpose serial
communication type.
Keep Current Settings
Select this check box to save the settings.