Panasonic GT series - Page 38

3.2 Creating the Main Panel (Base Screen: B-0)
3-9
 Setting part attributes
1. Double-click the lamp switch part whose attributes you want to set.
A dialog box for setting its attributes is displayed.
2. Set the necessary attributes.
Part
number
Part
attribute
Replacement
Style
Font settings
Switch
operation
SW0
Switch
Replacement
Operation:
Lamp (ON/OFF)
Device: R101
Select From
Design Library,
SW_SL2_C_W
―
Operation Mode:
Alternate
Output Device: R101
SW1
Switch
Replacement
Operation:
Not Replace
Select From
Design Library,
FS_R_RB1_W
Character String:
Eng/"Clock
Setting"
Operation Mode:
Change to GT
Configuration/Clock
Setting
SW2
Switch
Replacement
Operation:
Not Replace
Select From
Design Library,
FS_R_RB1_W
Character String:
Eng/"Change
Language"
Operation Mode:
Change Screen
Screen No.:2
SW3
Switch
Replacement
Operation:
Lamp (ON/OFF)
Device: R100
Select From
Design Library,
FS_M_SB1_B
―
Operation Mode:
Bit Set
Output Device: R100
Operation Mode:
Bit Reset
Output Device: R102
SW4
Switch
Replacement
Operation:
Lamp (ON/OFF)
Simple/SW1
Color: Blue
―
Operation Mode:
Bit Reset
Output Device: R100
Operation Mode:
Bit Set
Output Device: R102
 Settings that are not changed from the initial settings are listed as "-" or are omitted.
 You can also set the part attributes by selecting [Parts Attribute] in the
context menu displayed when you right-click the part.