Panasonic GT series - SYSMAC C Series

3.2 Creating the Main Panel (Base Screen: B-0)
3-11
 Setting part attributes
1. Double-click the data part whose attributes you want to set.
A dialog box for setting its attributes is displayed.
2. Set the necessary attributes.
Part
number
Basic setup
Input
DA0
No. of Digits: 5
Data Format: DEC (1 Word,
Unsigned)
Reference Device: DT100
Index modifier: No
Display Form: Display with "****"
Font and Size/Number of Dots: 36
Input: Off
DA1
No. of Digits: 5
Data Format: DEC (1 Word,
Unsigned)
Reference Device: DT101
Index modifier: No
Display Form: Display with "****"
Font and Size/Number of Dots: 36
Input: Off
DA2
No. of Digits: 4
Data Format: DEC (1 Word)
Reference Device: DT102
Index modifier: No
Display Form: Display with "****"
Display Decimal Places:
On/Decimal Places 1 digit(s)
Font and Size/Number of Dots: 36
Input: Off
DA3
No. of Digits: 4
Data Format: DEC (1 Word,
Unsigned)
Reference Device: DT103
Index modifier: No
Display Form: Display with "****"
Font and Size/Number of Dots: 36
Input: On
Startup Condition: Press
Supported Keyboard: Keyboard Screen 0