4.1 Useful Functions for Editing/Setting
Converting lamp switch parts to custom parts
The following section explains the procedure for converting a switch part that has been placed
from the [Switch] library into a custom part.
1. Double-click a part that has been placed.
The [Lamp Switch Part] dialog box, which can be used to set part attributes, is
displayed.
2. Select the [Style] tab.
3. Press [Convert to Custom Switch] in the lower-right corner of the field.
A message box for confirming the conversion method will be displayed.
4. To keep the displayed image, press [Yes]. To delete this image, press [No].
The conversion will be performed according to the method that you select, and
then the details after the conversion will be displayed in the dialog box. The
following figure shows an example of the displayed image being kept.
To Next Page
Loading...
