105
VQT3W38
≥ The disc that was copied to can be played back by connecting this unit and a DVD
burner.
≥ Do not turn off this unit or the DVD burner or disconnect the USB Connection Cable while
copying. Also, do not shake this unit or the DVD burner.
≥ It is impossible to stop copying halfway.
≥ The order in which the scenes were copied cannot be changed.
≥ Data that has been recorded on another device may not be copied.
≥ When 2 or more discs are necessary for copying, the last scene copied to a disc is
automatically divided to fit the space on the disc.
≥ Copying may complete with more or less than the number of discs displayed when dividing
of scenes was performed automatically etc.
≥ For discs being copied using [Standard] ([XP])/[Standard] ([SP]), you cannot select
Highlight Playback and [HIGHLIGHT] or [FACE] of Highlight & Time Frame Index.
≥ The remaining copy time displayed while copying is the approximate time for a single disc.
Playing back the copied disc
≥ Only discs that have been copied by connecting this unit to the DVD burner or
created with HD Writer AE 4.0 can be played back.
A USB Connection Cable (supplied with DVD burner)
1 Connect this unit to the DVD burner to prepare for playback. (l 101)
≥ When playing back on a TV, connect this unit to the TV. (l 92)
2 Touch the scene or still picture to be played back and then play it
back.
≥ The playback operation is performed the same as when playing back motion pictures or
still pictures. (l 31, 72)
≥ It will return to Step 5 on page 102 when is selected in the thumbnail screen.
≥ It is also possible to switch the media to play back by touching the play mode select icon.
When the DVD burner is connected, the disc icon can be selected from the displayed
media types. (The still picture or the motion picture can be selected on the same screen.)
HC-V500&V500M-EB-VQT3W38_mst.book 105 ページ ２０１２年１月１３日 金曜日 午後９時４分
To Next Page
Loading...
